DN8 No Leakage Stainless Steel Sample Valve , Sanitary Pipe Fittings And Valves

TP316L 304 Stainless Steel Sampling Valves santiary stainless steel pipefittings

The Sample Valve by Spezilla is autoclavable and made from FDA-approved materials. Durable, sanitary and competitively priced, the Spezilla Sample Valve is available with a choice of Molded Black Handle or Machined Stainless Steel Handle. Available with Sanitary Thread, Male Taper Pipe Thread or Tri-Clamp Ends.

Application

SPEZILLA series is a stainless steel aseptic sampling valve with pneumatic actuator; it is wildly used in the food, dairy, brewery, winery and many other hygienic industries.

Materials

Materials: AISI-316L
Size: DN8
Diaphragm: Silicone (for standard valve), EPDM (for valve with micro type connector)

Strength:

• Material of stainless steel 316L and 1.4404 is from reputed mill to guarantee the chemical composition and mechanical properties. Material certificate will be submitted follow to orders.
• Forged valve body and disc to control the leakage and visual.
• Superior facilities and good experiences for fabrication.
• In ability to improve and develop new design.
• Fast delivery is possible to meet your needs well in time.
• Low cost from bulk production will reduce your budget and improve your business.
• Small quantity available.

The Sample Valve type is used to treat high viscosity materials, such as yoghourt, syrup, ice cream, etc. The valve is normally closed design, it will open when pushing the handle and will return to nominal close position automatically by spring.

Sanitary Solutions is your source for a T304 Sanitary Sample Valve primarily found in the Beverage, Brewery, Pharmaceutical, Tank and Winery Industries. Our TP304 Sanitary Sample Valve is clamp end with either a 3/8" or 1/2" spout depending on the size needed. As for the surface finish of the valve, our valve is polished to meet sanitary standards.

Design:

• Sanitary sampling valve consists of three parts – a valve body, a valve head and a membrane. The rubber membrane is placed on the stem of the valve head and works as a stretchable plug.
• The membrane functions are both – as a dynamic packing in the valve seat and as a hygienic, static packing against the valve body.
• The unique design eliminates dead spaces and preventing microbial and particulate build-up -which may interfere with microbiological test results.
• Perfect hygienic design and surface finish of the inner part of sanitary sampling valve enables absolute sterilization in a closed state.
• Sterilization and sampling can be carried out regularly without interrupting the production process.
• Easily attached to a liquid distribution line or a storage tank.

Nominal Pressure:

Max. product pressure: 87psi (6bar)

Temperature:

Max. sterilization temperature: 130°C, dry steam: 121°C (2bar).
Steam must be dry, because condensed water will damage the diaphragm. The diaphragm should be replaced after 100 times samplings or sterilizations.

Sample Valves and Equipment,offers a wide array of sanitary sample valves for many applications including beverage, semiconductor and biopharmaceutical water systems. Our stainless steel sampling valves allow the user to easily extract a sanitary sample of a liquid for analysis.

Sanitary Solutions is your source for a T304 Sanitary Sample Valve primarily found in the Beverage, Brewery, Pharmaceutical, Tank and Winery Industries. Our TP304 Sanitary Sample Valve is clamp end with either a 3/8" or 1/2" spout depending on the size needed. As for the surface finish of the valve, our valve is polished to meet sanitary standards.

Sanitary sample valve is a type of valve used in process industries that allows taking a representative portion of a fluid (gases, liquids, fluidized, solids, or slurries) to test (e.g. by physical measurements, chemical analysis, microbiological examination), typically for the purposes of identification, quality control, or regulatory assessment. It is a valve used for sampling.

Sanitary Solutions is your source for a T304 Sanitary Sample Valve primarily found in the Beverage, Brewery, Pharmaceutical, Tank and Winery Industries. Our TP304 Sanitary Sample Valve is clamp end with either a 3/8" or 1/2" spout depending on the size needed. As for the surface finish of the valve, our valve is polished to meet sanitary standards.

Quality & Inspection:

• PMI test to verify material grade
• Dimension controlling during fabricating and finished
• Visual and surface 100% examination before shipment
• Packed in carton box firstly, then in wooden case
• Third party inspection available.