ASTM A270 Stainless Steel Sanitary Valves / Elbow Valves With Tight Tolerances

Sanitary Elbow Valves Stainless Steel Valves And Fittings ASTM A270

Spezilla can offer Sanitary Fittings, Hygienic fittings, Tri Clamp Fittings, Tri Clover Fittings, Clamp Fittings, Tube Fittings in the shapes of Short Elbow 45, Long Elbow 45, Short Elbow 90, Long Elbow 90, Tube Bends, Short Tee, Long Tee, Short Cross, Long Cross, Reducing Tee, Reducing Cross, Concentric Reducer and Eccentric Reducer are available for Weld Fittings, Clamp Fittings, DIN Fittings, SMS Fittings, BS Fittings. Our sanitary flanges and clamp fittings are designed for easy, rapid maintenance. Flanges and clamps with finger nuts are especially suited for processes in which the load on seals is extra high, where the easy checking and replacement of seals is important and where effective cleaning is required. The feature of our Sanitary fittings, Sanitary tubes, Hygienic fittings, Tri clamp fittings, Tri clover Fittings, Clamp Fittings, Tube Fittings are tight tolerances, uniform wall thicknesses with all the angles exact and all tube, bend and tee connections uniform to ensure the greatest possible strength and long service life, as well as problem-free welding and assembly.

All sizes of clamp end also available

ASME BPE PRODUCT SPECIFICATION

Material:

316L, chemical composition in accordance with ASTM A240

304L, 1.4404 and 1.4435 also available EN10088

Tolerances:

According to ASME BPE-2009

All types of sanitary stainless steel flow control equipment for the food & beverage, dairy, cosmetic, biotechnology, pharmaceutical, and electronic processing industries.

We also carry a wide assortment of sanitary fittings, gaskets, pumps, and valves.

Additional sizes and types are available upon request.

Valve line includes, ball, butterfly, check, seat, long stroke, mix proof, PMO, diaphragm and sampling. All valves can be supplied with a variety of actuation and control packages.

Sanitary pump line includes both centrifugal and positive displacement pumps.

Size :

Usually 1" - 4", any size is demandable

Fitting ends :

BS, DIN, SMS, A270, Weld ends, Male ends and Clamp ends

Working pressure :

* -0.9 to 10 Bar for cast body

* -0.9 to 20 Bar for forged body

Working temperature :

-10oC up to 150oC

Disk head size :

* 9.4 x 9.4mm available for cast & forged body

* 8 x 12mm, 12 x 12mm available for forged body

Safety :

100% 6kgf/cm2 air or 25kgf/cm2 hydraulic and

300k times cycle test