High Safety 3A Sanitary Fittings Polished Ferrules Tee Elbows With Smooth Surface

316L Stainless Steel Sanitary Valves And Fittings , Polished Ferrules Tee Elbows Standard 3A

Spezilla is your source for T304 or T316L Sanitary Clamp Fittings and Gaskets primarily found in the Bakery, Beverage, Cosmetic, Dairy, Food or Pharmaceutical Industries. Our Sanitary Clamp Fittings meet or exceed A270 standards with an ID polish of 180 Grit or 25 Ra on the Inside of the Tube and a 150 Grit or 32 Ra on the Outside of the tube. Sanitary Solutions stock clamp fittings that are capped, bagged and marked with the size and alloy and a heat number for full traceability for either alloy.

All types of sanitary stainless steel flow control equipment for the food & beverage, dairy, cosmetic, biotechnology, pharmaceutical, and electronic processing industries.

We also carry a wide assortment of sanitary fittings, gaskets, pumps, and valves.

Additional sizes and types are available upon request.

Valve line includes, ball, butterfly, check, seat, long stroke, mix proof, PMO, diaphragm and sampling. All valves can be supplied with a variety of actuation and control packages.

Sanitary pump line includes both centrifugal and positive displacement pumps.

Alloy: T304 or T316L

Sizes: 1.50", 2.00", 3.00" OD

Seats: EPDM or Silicone

Finish: Polish to a 32 Ra ID/OD

Handle Interchanges to either side

Field Serviceable

100% Hydraulic Pressure Tested

Economical Price for all sizes from 1.5" -- 4"

Weld Ends:

Weld ends of tubes and fittings are prepared for orbital automatic tube weld

Surface Finish:

We provide quality mechanical polish from 32 µ-in through to 15 µ-in.

Electropolishing and other requirements are available upon request.

Test Procedures:

Control of dimensions

End preparation

Internal surface roughness measurements

Visual inspection

Short Cross

Short Equal Tee