Anti Corrosion 3A Sanitary Fittings SS Elbow Clamp For Electronic Processing Industries

Stainless Steel Sanitary Fittings Valves Clamp Elbows Material 304 316

Sanitary Valves And Fittings 1/2'' to 4'' TP316L Stainless Steel Reducing Tee Cross Ends

All sizes of clamp end also available

ASME BPE PRODUCT SPECIFICATION

Material:

316L, chemical composition in accordance with ASTM A240

304L, 1.4404 and 1.4435 also available EN10088

Tolerances:

According to ASME BPE-2009

Spezilla is your source for T304 or T316L Sanitary Clamp Fittings and Gaskets primarily found in the Bakery, Beverage, Cosmetic, Dairy, Food or Pharmaceutical Industries. Our Sanitary Clamp Fittings meet or exceed A270 standards with an ID polish of 180 Grit or 25 Ra on the Inside of the Tube and a 150 Grit or 32 Ra on the Outside of the tube. Sanitary Solutions stock clamp fittings that are capped, bagged and marked with the size and alloy and a heat number for full traceability for either alloy.

All types of sanitary stainless steel flow control equipment for the food & beverage, dairy, cosmetic, biotechnology, pharmaceutical, and electronic processing industries.

We also carry a wide assortment of sanitary fittings, gaskets, pumps, and valves.

Additional sizes and types are available upon request.

Valve line includes, ball, butterfly, check, seat, long stroke, mix proof, PMO, diaphragm and sampling. All valves can be supplied with a variety of actuation and control packages.

Sanitary pump line includes both centrifugal and positive displacement pumps.

Size :

Usually 1" - 4", any size is demandable

Fitting ends :

BS, DIN, SMS, A270, Weld ends, Male ends and Clamp ends

Working pressure :

* -0.9 to 10 Bar for cast body

* -0.9 to 20 Bar for forged body

Working temperature :

-10oC up to 150oC

Disk head size :

* 9.4 x 9.4mm available for cast & forged body

* 8 x 12mm, 12 x 12mm available for forged body

Safety :

100% 6kgf/cm2 air or 25kgf/cm2 hydraulic and

300k times cycle test